Crane Rental in Jeddah

Cranes in Jeddah are tied to the port, the industrial area, towers and construction, and each setting has its own limits: in the port and industrial area the site operators set entry rules and inspection; in crowded districts the street width and parking space decide whether a crane can arrive and spread its outriggers; and on the coast wind acts on a long boom. So the first questions before the class are: what does the load weigh, how far and how high will it go, and will the site take the crane?

This page lists classes from 25 t to 500 t, how to choose between them, and what to prepare before you ask. It makes no promise on availability or delivery time, and it does not say what a quote includes in terms of operator, rigger or permits; the quote sets that out.

Crane classes listed for rent in Jeddah

Max capacityBoom lengthTypeDetails
25 t (approx.)up to about 30 mMobile craneCrane 25 t in Jeddah
50 t (approx.)up to about 40 to 45 mMobile craneCrane 50 t in Jeddah
100 t (approx.)up to about 50 to 60 mAll terrain / mobile craneCrane 100 t in Jeddah
200 t (approx.)up to about 60 to 70 mHeavy mobile / crawler craneCrane 200 t
300 t (approx.)up to about 70 to 80 mHeavy mobile / crawler craneCrane 300 t
500 t (approx.)up to about 90 to 100 mHeavy crawler craneCrane 500 t

Capacities are approximate and change with lift radius. Availability of a class and access to your site in Jeddah are confirmed after you send the request. To compare two classes see crane 25 t vs 50 t.

Which crane class fits your job in Jeddah

In Jeddah the decision often starts from the street rather than the load: can the heavy truck get there, and is there room to spread the outriggers? After access come the three numbers: load weight with rigging, lift radius and height. The tighter the site, the shorter the radius available or the greater the need for a longer boom, and either can change the class that suits.

Type of jobUsual classWhat to defineNote
Lifting and erecting on a medium construction site25 t usuallyLoad weight, radius and heightSuits medium projects according to the class data
Factory or large warehouse in the industrial area50 t usuallyCrane position and outrigger spreadOverhead obstacles and the facility entry rules
Heavy industrial projects100 t usuallyBoom length and the lift planTransport and site planned in advance
Very heavy lifts near the port200 to 500 tCrane type and transport routeNeeds site assessment and early coordination
Site in a crowded or older districtSet by the three numbers and the street widthParking space and outrigger spreadCheck restrictions on heavy truck entry

What changes the choice in Jeddah

Access comes first. A crane is a heavy truck, and street width, bends and local vehicle restrictions can decide whether it reaches the site at all, especially in older districts. Send the exact location and a photo of the street, and ask the local authority about restrictions on trucks and equipment.

Then wind and ground: sea wind acts on a long boom and we give no numeric limit since operating limits are in the crane manual, and ground near the coast may be sandy or filled, so check that it can carry the outriggers.

Service areas in Jeddah

This page is for equipment rental requests in Jeddah. Please contact us to confirm equipment availability and suitable transport options. Tell us the district or exact site when you ask, as it helps us assess access and transport. Areas listed on the site: Industrial Area, Bryman, Al Hamra, Ar Rawdah, Al Balad, North Obhur.

Safety and site checks in Jeddah

In crowded districts, organising the surroundings is part of the lift: barriers, a signaller to stop pedestrians and vehicles passing under the boom, and perhaps a different working time to ease congestion, agreed with the relevant authority. This page does not say who supplies the operator and rigger or who obtains permits; the quote does.

Near the coast, check the wind forecast against the load chart limits, confirm the ground is firm under every outrigger, and start with a short trial lift before the full lift. Avoid lifting over open streets or power lines.

How to request a crane in Jeddah

  • The load weight and rigging gear
  • Lift radius and final height
  • The exact address and a photo of the street (width, bends and overhead wires)
  • Parking space, outrigger spread and ground condition
  • The lift date, and whether work at night or outside peak hours is needed
  • Any restrictions on heavy truck entry, and whether you need an operator and rigger

Questions to settle before you order in Jeddah

Can the lift be done at night?

You can ask for it and state it in the request. Whether it is possible depends on what the relevant authority and your site allow. We do not promise a date before reviewing the details.

How do I know if the truck can reach an older district?

Send the exact location and a photo of the street and we assess the width, bends and restrictions before any arrangement, with no promise before seeing the site.

What changes near the port or the industrial area?

Usually entry and inspection rules set by the site operator and truck congestion. Ask early and send us what they require.

Do I need a permit to occupy part of the road?

It may be required from the relevant authority and it is outside our control. Check early, because it can decide the lift date.

Related pages

Frequently Asked Questions

Why is the load weight not enough to specify a crane class?

Because a crane capacity falls as the lifting radius increases - the further the set-down point is from the machine centre. A crane rated at 50 tons may have only a fraction of that at a 20-metre radius. Specification therefore starts from two numbers together: the weight, and the horizontal distance between where the crane stands and where the load lands.

What needs to be ready on site before the crane arrives?

A level, stable standing position with room to deploy outriggers, confirmation that the ground bears the pressure beneath them, an approach route that accommodates the machine width and height, and a secured lift area nobody passes beneath. The load weight is established precisely before lifting rather than estimated, and wind speed limits belong in the lift plan.

How do I confirm a size is available in Jeddah?

Availability depends on the size requested, the dates and the project location within Jeddah, so it is confirmed per request rather than shown on the page. Send those details through the quote form or WhatsApp and you will get a reply confirming availability.

What does it cost to rent in Jeddah?

There is no published price list: the rate changes with size, hire duration, project location and delivery arrangements, so a single number would be misleading for most cases. Send your project details and you will get a quote built on them.

Does the hire include an operator?

It depends on the machine and your project requirements. Cranes and excavators require a qualified operator, while scissor lifts and man lifts can be run by a trained technician. State what you need when requesting a quote so the price covers it.

What hire durations are available?

From a single day to more than a month. Short defined jobs suit daily hire; work running for weeks is cheaper per unit of time on weekly or monthly hire. Bear in mind that each delivery and collection cycle carries its own cost, so scattering a job across separate short hires usually costs more than one continuous period.

Request a quote

Your details
Equipment needed
Project details

Your request is saved, then WhatsApp opens with a ready message to confirm the details with the rental team. Availability, transport and operating costs are set after reviewing the project site and rental period.