300 ton vs 500 ton Cranes
These are the two adjacent cranes sizes either side of the same decision: 300 طن and 500 طن. The step between them is one step in capacity, and this page sets their real specifications side by side so you can see exactly what that step changes – and whether you actually need it.
More capacity means a larger machine needing a wider standing area and outriggers, and an approach route that accommodates its dimensions.
Specifications side by side
| Specification | 300 Ton Crane | 500 Ton Crane |
|---|---|---|
| Max Lifting Capacity | ~300 tons (approximate, depends on lift radius) | ~500 tons (approximate, depends on lift radius) |
| Boom Length | Up to ~70-80 meters, varies by model | Up to ~90-100 meters, varies by model |
| Crane Type | Heavy Mobile / Crawler Crane | Heavy Crawler Crane |
| Best Suited For | Major national industrial projects | The largest industrial and national projects |
When 300 طن is enough
Choose the smaller size when your work genuinely sits inside its range. A machine bigger than the job needs costs more per day, weighs more on the floor and needs more room to manoeuvre – and on a constrained site it may simply not fit. These are the jobs 300 طن is built for:
- Lifting giant industrial units
- Refinery and large industrial plant projects
- Strategic infrastructure projects
- Major national projects
When to step up to 500 طن
Step up when the job sits at or beyond the edge of the smaller machine's range. Working right at the limit of a size is not a margin – it is the point where you discover mid-job that you cannot reach. These are the jobs 500 طن covers:
- Lifting the largest industrial units
- Giant refinery projects
- Major strategic energy projects
- National projects requiring exceptional lifting capacity
The rule that settles it
Size from the heaviest single load you will actually lift, not the average – sizing on the average means failing on exactly the loads you hired the machine for. Then check the figure at the height or radius you will genuinely work at, because rated capacity drops as the load goes higher or further out.
If you are still between the two, send the working height or load and the site conditions with your quote request and the suitable size will be recommended – that costs nothing and avoids hiring the wrong machine twice.
Full details for each size
Frequently Asked Questions
What is the difference between 300 طن and 500 طن?
They are adjacent sizes one step apart in capacity. More capacity means a larger machine needing a wider standing area and outriggers, and an approach route that accommodates its dimensions.. The specification table on this page sets both out side by side.
How do I decide between them?
Size from the heaviest single load you will actually lift, not the average - sizing on the average means failing on exactly the loads you hired the machine for. Then check the figure at the height or radius you will genuinely work at, because rated capacity drops as the load goes higher or further out.
Which one costs more to rent?
The larger size generally costs more, but there is no published price list - the rate changes with size, hire duration, project location and delivery arrangements. Send your project details for a quote covering whichever size suits.