Cranes for Factories and Production Lines
In factories and production lines, cranes are used above all for installing machinery when a production line is built or expanded. This page covers what that work demands of the machine, which sizes suit it, and the constraints the setting itself imposes before height or capacity are even considered.
What factories and production lines demand of a machine
A factory is constrained by four things at once: a level concrete floor, a high roof, narrow pre-set aisles between production lines, and production that usually does not stop. The last is the hardest, because it means working among running plant and working people.
The constraint missed most often is not height but aisle width: a machine with excellent lifting specifications that cannot pass between two adjacent production lines is useless in that factory. The second is power type – exhaust is not acceptable inside an enclosed hall with limited ventilation, and becomes an additional quality problem in food and pharmaceutical plants.
What this machine is, and when it is the right one
A crane is a heavy lifting machine, and differs from the rest of this list in that it lifts materials and equipment rather than people. It is rated by maximum lifting capacity in tons, but that figure alone is misleading if taken in isolation.
The reason is that a crane's capacity falls as the lifting radius increases – the further the set-down point is from the machine's centre. A crane rated at 50 tons may have only a fraction of that capacity at a 20-metre radius. Any serious crane specification therefore starts from two numbers together: the weight, and the horizontal distance between where the crane stands and where the load lands.
Crane sizes used in factories and production lines
| Size | Key specification | Page |
|---|---|---|
| 25 طن | Boom Length: Up to ~30 meters, varies by model | 25 Ton Crane in factories |
| 50 طن | Boom Length: Up to ~40-45 meters, varies by model | 50 Ton Crane in factories |
| 100 طن | Boom Length: Up to ~50-60 meters, varies by model | 100 Ton Crane in factories |
| 200 طن | Boom Length: Up to ~60-70 meters, varies by model | 200 Ton Crane in factories |
| 300 طن | Boom Length: Up to ~70-80 meters, varies by model | 300 Ton Crane in factories |
| 500 طن | Boom Length: Up to ~90-100 meters, varies by model | 500 Ton Crane in factories |
We rent 6 sizes in this category. Which one suits depends on the specific site rather than on the sector – two warehouses can need sizes two steps apart. Availability of a given size on your dates is confirmed on request.
Choosing the size
Start from three inputs: the weight of the heaviest piece, the maximum horizontal distance from where the crane stands to the set-down point, and the lift height required. Those three together – not weight alone – determine the crane class.
The fourth input is the standing position itself: is there room to deploy outriggers? Will the ground bear the pressure beneath them? Are there overhead power lines or adjacent buildings limiting boom rotation? On congested urban sites that constraint sometimes matters more than the crane's own specification.
The fifth is the nature of the load: a compact heavy piece handles very differently from a light but bulky one exposed to wind. State the dimensions of the piece, not just its weight.
Specifications for each size
25 Ton Crane in factories
| Max Lifting Capacity | ~25 tons (approximate, depends on lift radius) |
|---|---|
| Boom Length | Up to ~30 meters, varies by model |
| Crane Type | Mobile Crane |
| Best Suited For | Medium-sized construction projects |
Typical uses:
- Lifting and installing precast concrete structures
- Small and medium factory operations
- Lifting equipment on project sites
- Structural maintenance work
Full details for 25 Ton Crane ←
50 Ton Crane in factories
| Max Lifting Capacity | ~50 tons (approximate, depends on lift radius) |
|---|---|
| Boom Length | Up to ~40-45 meters, varies by model |
| Crane Type | Mobile Crane |
| Best Suited For | Factories and industrial facilities |
Typical uses:
- Installing heavy industrial equipment
- Lifting large steel structures
- Factory and industrial complex operations
- Infrastructure projects
Full details for 50 Ton Crane ←
100 Ton Crane in factories
| Max Lifting Capacity | ~100 tons (approximate, depends on lift radius) |
|---|---|
| Boom Length | Up to ~50-60 meters, varies by model |
| Crane Type | All Terrain / Mobile Crane |
| Best Suited For | Heavy industrial projects and refineries |
Typical uses:
- Lifting large industrial units
- Refinery and petrochemical complex projects
- Energy and major facility projects
- Heavy industrial maintenance work
Full details for 100 Ton Crane ←
200 Ton Crane in factories
| Max Lifting Capacity | ~200 tons (approximate, depends on lift radius) |
|---|---|
| Boom Length | Up to ~60-70 meters, varies by model |
| Crane Type | Heavy Mobile / Crawler Crane |
| Best Suited For | Massive industrial and major national projects |
Typical uses:
- Lifting extremely heavy units
- Refinery and large industrial plant projects
- Strategic infrastructure projects
- Major national projects
Full details for 200 Ton Crane ←
300 Ton Crane in factories
| Max Lifting Capacity | ~300 tons (approximate, depends on lift radius) |
|---|---|
| Boom Length | Up to ~70-80 meters, varies by model |
| Crane Type | Heavy Mobile / Crawler Crane |
| Best Suited For | Major national industrial projects |
Typical uses:
- Lifting giant industrial units
- Refinery and large industrial plant projects
- Strategic infrastructure projects
- Major national projects
Full details for 300 Ton Crane ←
500 Ton Crane in factories
| Max Lifting Capacity | ~500 tons (approximate, depends on lift radius) |
|---|---|
| Boom Length | Up to ~90-100 meters, varies by model |
| Crane Type | Heavy Crawler Crane |
| Best Suited For | The largest industrial and national projects |
Typical uses:
- Lifting the largest industrial units
- Giant refinery projects
- Major strategic energy projects
- National projects requiring exceptional lifting capacity
Full details for 500 Ton Crane ←
Diesel or electric?
Mobile cranes run on diesel; there is no practical electric option in this class. The main operational consideration is not power type but whether the machine can reach the site at all: the width of the approach roads, the clearance of any bridges or tunnels on the route, and the room to manoeuvre once inside.
For work inside established industrial facilities, the facility's own access requirements apply – they differ between facilities and cannot be assumed – so they are reviewed before anything is agreed rather than at the gate.
Safety and operating considerations
Crane work requires more advance planning than any other machine in this list, because mistakes are not limited in their effect. The essentials: establishing the load weight precisely before lifting rather than estimating it, confirming the ground bears the outrigger pressure, and securing the lift area so nobody passes beneath the load.
Wind is more decisive in crane work than for any other machine, particularly with large-area loads that act like a sail. Wind speed limits therefore belong in the lift plan in advance, and postponing a lift is an acceptable decision rather than a scheduling failure.
Related pages
Frequently Asked Questions
Are cranes suitable for factories and production lines?
Yes - their primary use in this setting is installing machinery when a production line is built or expanded. Which size suits depends on the specific site: the working height or load, the ground, and the access route.
What should I measure before ordering for factories and production lines?
The working height or the heaviest load, the narrowest point on the access route, the lowest doorway, and the floor type or condition. On sites above a basement, the floor loading limit as well. Those decide whether a machine fits before its lifting specification matters.
Does the hire include an operator?
It depends on the machine. Cranes and excavators require a qualified operator; scissor lifts and man lifts can be run by a trained technician. State what you need when requesting a quote so the price covers it.
How much does it cost?
There is no published price list: the rate changes with size, hire duration, project location and delivery arrangements. Send your project details and you will get a quote built on them.