Lifting Equipment for Commercial Projects and Malls
Commercial projects – malls, showrooms, shops and restaurants – combine two constraints that rarely appear together: work at significant height in open halls, and high sensitivity to any mark left on the place or disruption to visitors.
The floors here are expensive and exposed: marble, porcelain, polished finishes. A machine on the wrong tyres, or carrying too much weight, leaves permanent marks that cost more to repair than the entire hire.
The second constraint is time: much mall work is carried out at night after closing, inside a window measured in hours. Scheduling is part of the specification, not a side detail.
Which equipment suits this work
| Equipment | Why it fits | Typical sizes |
|---|---|---|
| Scissor Lifts | Installing interiors, lighting and ceilings in open halls and shop units | 6 – 22 m |
| Man Lifts | Signage, external facades and reaching over glazed frontages | 10 – 43 m |
| Boom Trucks | Lifting and fixing signage and heavy elements onto facades from outside | 5 – 10 ton |
| Forklifts | Moving stock and fittings during fit-out and before opening | 1.5 – 30 ton |
Sizes shown are the range we rent within each category. Availability of a specific size at your project site is confirmed on request.
Protecting the floor: the item forgotten until it is too late
Floors in commercial projects are finished, exposed and expensive. A heavy machine, or one on unsuitable tyres, leaves scratches or permanent pressure marks, and repairing them typically costs several times the hire.
The practical solutions are simple and well known: choose a machine on non-marking tyres, spread the load over protection boards at the standing points, and work from total operating weight rather than the machine’s empty weight. State the floor type when requesting a quote.
Night work inside a fixed window
In a trading mall, work is usually carried out between closing and opening – a window that may be no more than six hours, and it has to include bringing the machine in, doing the work, and taking it out again.
That means set-up and fold-down time is part of the schedule, not dead time. It also means the delivery slot has to be fixed to the hour, not the day. State your working window when requesting a quote so delivery can be arranged around it.
Fitting out a unit before opening
Fit-out is intense and short: interiors, lighting, signage and shelving, all inside a limited number of weeks before a fixed opening date that does not move.
Here weekly or monthly hire suits better than daily, because the need is continuous and daily. Give the target opening date when requesting a quote – it sets the return date, and therefore the duration and the price.
Frequently Asked Questions
Will the equipment mark the mall floor?
It depends on the machine type, its tyres and its operating weight. Machines with non-marking tyres are available for finished floors, and protection boards can be used to spread the load. State the floor type when requesting a quote so the right machine can be recommended.
Can delivery and work happen at night?
State the working window you need, to the hour, when requesting a quote and you will get a reply on what can be arranged. Night work is common in trading commercial projects, but delivery outside normal hours needs to be coordinated in advance.
What hire duration suits a shop fit-out?
During fit-out the need is daily and continuous over several weeks, so weekly or monthly hire is usually better value than daily. Give the start date and the target opening date so the quote covers the right duration.
Need lifting equipment for your project?
Talk to the rental team to pick the right equipment and size, and check availability at your project site.