Boom Trucks for Commercial Projects and Malls
In commercial projects and malls, boom trucks are used above all for lifting and fixing signage and heavy elements onto frontages. This page covers what that work demands of the machine, which sizes suit it, and the constraints the setting itself imposes before height or capacity are even considered.
What commercial projects and malls demand of a machine
Commercial projects – malls, showrooms, shops and restaurants – combine two constraints that rarely appear together: work at height in open halls, and high sensitivity to any mark left on the place.
Flooring is the first constraint here, not height: marble, porcelain and polished finishes, exposed and final, where a machine on unsuitable tyres or carrying too much weight leaves permanent marks costing several times the entire hire to repair. The second is time: much of the work is carried out between closing and opening inside a window that may be no more than six hours, covering bringing the machine in, working, and taking it out – so set-up and fold-down time is part of the calculation, not dead time.
What this machine is, and when it is the right one
A boom truck is a truck fitted with a hydraulic crane mounted on its chassis. That combines two advantages: the machine reaches site under its own power without a low-bed, and carries the piece to be lifted on its own bed at the same time.
That arrangement makes it the practical choice in a specific, clear range: mid-weight lifts moving between more than one site in the same day. Bringing a crane to one site for a single lift and then moving it to another is expensive and slow; a boom truck drives itself there and starts work within minutes of arriving.
Boom Truck sizes used in commercial projects and malls
| Size | Key specification | Page |
|---|---|---|
| 5 طن | Boom Length: Up to ~15-20 meters, varies by model | 5 Ton Boom Truck in commercial projects |
| 10 طن | Boom Length: Up to ~20-25 meters, varies by model | 10 Ton Boom Truck in commercial projects |
We rent 2 sizes in this category. Which one suits depends on the specific site rather than on the sector – two warehouses can need sizes two steps apart. Availability of a given size on your dates is confirmed on request.
Choosing the size
Establish the weight of the heaviest piece and the horizontal distance together – lifting capacity here falls with radius exactly as it does on a crane. The difference is that boom trucks usually work at smaller radii, so paying attention to that figure matters more, not less.
Ask about the standing room available: a boom truck needs space to deploy outriggers on both sides, and on narrow streets or in crowded parking areas that is often the real obstacle rather than lifting capacity.
And if the job includes transporting the piece to site as well, state its dimensions and weight – the truck bed has its own limits independent of what the boom can lift.
Specifications for each size
5 Ton Boom Truck in commercial projects
| Max Load Capacity | ~5 tons approximately |
|---|---|
| Boom Length | Up to ~15-20 meters, varies by model |
| Power Type | Diesel |
| Best Suited For | Fast loading/unloading between multiple sites |
Typical uses:
- Fast loading and unloading at warehouses
- Multi-site maintenance work in the same day
- Transporting light to medium equipment
- Supporting small to medium construction sites
Full details for 5 Ton Boom Truck ←
10 Ton Boom Truck in commercial projects
| Max Load Capacity | ~10 tons approximately |
|---|---|
| Boom Length | Up to ~20-25 meters, varies by model |
| Power Type | Diesel |
| Best Suited For | Heavier lifting requiring fast mobility |
Typical uses:
- Lifting medium-weight industrial equipment
- Factory and construction site work
- Loading and unloading heavier loads
- Supporting multi-site projects
Full details for 10 Ton Boom Truck ←
Diesel or electric?
A boom truck runs on diesel like any truck, and the main operational consideration is not power but access and set-up: street width, room to deploy outriggers, and the clearance of anything on the approach route.
Its core advantage – that it moves itself – becomes a constraint at sites where parking a truck is difficult: underground car parks, streets with parking restrictions, or locations inside facilities that require vehicle entry permits.
Safety and operating considerations
Outriggers are the first safety point on a boom truck: they must be fully deployed on ground that bears the pressure beneath them before any lift. Lifting on partly deployed outriggers or soft ground is the most common cause of these machines tipping.
Two further considerations: securing the lift area so nobody passes beneath the load – harder on a public street than on a closed site; and overhead power lines, which are particularly close in the residential and commercial streets where boom trucks most often work.
Related pages
Frequently Asked Questions
Are boom trucks suitable for commercial projects and malls?
Yes - their primary use in this setting is lifting and fixing signage and heavy elements onto frontages. Which size suits depends on the specific site: the working height or load, the ground, and the access route.
What should I measure before ordering for commercial projects and malls?
The working height or the heaviest load, the narrowest point on the access route, the lowest doorway, and the floor type or condition. On sites above a basement, the floor loading limit as well. Those decide whether a machine fits before its lifting specification matters.
Does the hire include an operator?
It depends on the machine. Cranes and excavators require a qualified operator; scissor lifts and man lifts can be run by a trained technician. State what you need when requesting a quote so the price covers it.
How much does it cost?
There is no published price list: the rate changes with size, hire duration, project location and delivery arrangements. Send your project details and you will get a quote built on them.