Crane Rental in Al-Qunfudhah

Demand for cranes in Al-Qunfudhah comes mainly from installing silos, tanks and structures at agricultural facilities, and lifting formwork, rebar and precast elements.

Which size suits depends far more on the specific site than on the city: the work-point height or the load, the ground and access conditions, and how long the machine is needed. The sections below set out every size we carry with its specifications, so you can size from the work rather than from a guess – and availability in Al-Qunfudhah on your dates is confirmed when you ask.

What this machine is, and when it is the right one

A crane is a heavy lifting machine, and differs from the rest of this list in that it lifts materials and equipment rather than people. It is rated by maximum lifting capacity in tons, but that figure alone is misleading if taken in isolation.

The reason is that a crane's capacity falls as the lifting radius increases – the further the set-down point is from the machine's centre. A crane rated at 50 tons may have only a fraction of that capacity at a 20-metre radius. Any serious crane specification therefore starts from two numbers together: the weight, and the horizontal distance between where the crane stands and where the load lands.

Crane sizes available for rent in Al-Qunfudhah

SizeKey specificationPage
25 طنBoom Length: Up to ~30 meters, varies by model25 Ton Crane in Al-Qunfudhah
50 طنBoom Length: Up to ~40-45 meters, varies by model50 Ton Crane in Al-Qunfudhah
100 طنBoom Length: Up to ~50-60 meters, varies by model100 Ton Crane in Al-Qunfudhah
200 طنBoom Length: Up to ~60-70 meters, varies by model200 Ton Crane in Al-Qunfudhah
300 طنBoom Length: Up to ~70-80 meters, varies by model300 Ton Crane in Al-Qunfudhah
500 طنBoom Length: Up to ~90-100 meters, varies by model500 Ton Crane in Al-Qunfudhah

These are the 6 sizes we rent within this category. Availability of a specific size in Al-Qunfudhah on your dates is confirmed on request – send the size, the start date and the hire duration and you will get a reply with availability and pricing.

Choosing the right size for your project in Al-Qunfudhah

Start from three inputs: the weight of the heaviest piece, the maximum horizontal distance from where the crane stands to the set-down point, and the lift height required. Those three together – not weight alone – determine the crane class.

The fourth input is the standing position itself: is there room to deploy outriggers? Will the ground bear the pressure beneath them? Are there overhead power lines or adjacent buildings limiting boom rotation? On congested urban sites that constraint sometimes matters more than the crane's own specification.

The fifth is the nature of the load: a compact heavy piece handles very differently from a light but bulky one exposed to wind. State the dimensions of the piece, not just its weight.

Specifications for each size

25 Ton Crane in Al-Qunfudhah

Max Lifting Capacity~25 tons (approximate, depends on lift radius)
Boom LengthUp to ~30 meters, varies by model
Crane TypeMobile Crane
Best Suited ForMedium-sized construction projects

Typical uses:

  • Lifting and installing precast concrete structures
  • Small and medium factory operations
  • Lifting equipment on project sites
  • Structural maintenance work

Full details for 25 Ton Crane ←

50 Ton Crane in Al-Qunfudhah

Max Lifting Capacity~50 tons (approximate, depends on lift radius)
Boom LengthUp to ~40-45 meters, varies by model
Crane TypeMobile Crane
Best Suited ForFactories and industrial facilities

Typical uses:

  • Installing heavy industrial equipment
  • Lifting large steel structures
  • Factory and industrial complex operations
  • Infrastructure projects

Full details for 50 Ton Crane ←

100 Ton Crane in Al-Qunfudhah

Max Lifting Capacity~100 tons (approximate, depends on lift radius)
Boom LengthUp to ~50-60 meters, varies by model
Crane TypeAll Terrain / Mobile Crane
Best Suited ForHeavy industrial projects and refineries

Typical uses:

  • Lifting large industrial units
  • Refinery and petrochemical complex projects
  • Energy and major facility projects
  • Heavy industrial maintenance work

Full details for 100 Ton Crane ←

200 Ton Crane in Al-Qunfudhah

Max Lifting Capacity~200 tons (approximate, depends on lift radius)
Boom LengthUp to ~60-70 meters, varies by model
Crane TypeHeavy Mobile / Crawler Crane
Best Suited ForMassive industrial and major national projects

Typical uses:

  • Lifting extremely heavy units
  • Refinery and large industrial plant projects
  • Strategic infrastructure projects
  • Major national projects

Full details for 200 Ton Crane ←

300 Ton Crane in Al-Qunfudhah

Max Lifting Capacity~300 tons (approximate, depends on lift radius)
Boom LengthUp to ~70-80 meters, varies by model
Crane TypeHeavy Mobile / Crawler Crane
Best Suited ForMajor national industrial projects

Typical uses:

  • Lifting giant industrial units
  • Refinery and large industrial plant projects
  • Strategic infrastructure projects
  • Major national projects

Full details for 300 Ton Crane ←

500 Ton Crane in Al-Qunfudhah

Max Lifting Capacity~500 tons (approximate, depends on lift radius)
Boom LengthUp to ~90-100 meters, varies by model
Crane TypeHeavy Crawler Crane
Best Suited ForThe largest industrial and national projects

Typical uses:

  • Lifting the largest industrial units
  • Giant refinery projects
  • Major strategic energy projects
  • National projects requiring exceptional lifting capacity

Full details for 500 Ton Crane ←

Diesel or electric?

Mobile cranes run on diesel; there is no practical electric option in this class. The main operational consideration is not power type but whether the machine can reach the site at all: the width of the approach roads, the clearance of any bridges or tunnels on the route, and the room to manoeuvre once inside.

For work inside established industrial facilities, the facility's own access requirements apply – they differ between facilities and cannot be assumed – so they are reviewed before anything is agreed rather than at the gate.

The sectors driving demand in Al-Qunfudhah

Al-Qunfudhah is a Red Sea coastal governorate south of Jeddah: fishing activity and fishing harbours, an agricultural sector across the plain and surrounding valleys, alongside commercial, service and university activity serving the governorate and its scattered centres.

The governorate's geographic spread and the distribution of its centres is the most significant practical factor: distances between centres are large, and transport cost is counted per delivery and collection cycle. Specifying the project location precisely and grouping work across several sites into one schedule therefore affects cost more than negotiating the daily rate.

  • Fishing and cold-storage facilities
  • Agriculture and farms
  • Contracting and residential projects
  • Education and service facilities
  • Retail and distribution

Areas we arrange service to in Al-Qunfudhah

Delivery and collection are arranged across Al-Qunfudhah, including these areas. Give the district or the project address when you request a quote – it affects the transport arrangement, and on some sites it also affects which machine suits the access.

  • Al-Qunfudhah
  • Ash-Shati
  • Port Area
  • Al-Mudhaylif
  • Ar-Rawdah
  • An-Nahdah
  • Al-Faisaliyah
  • University District

Safety and operating considerations

Crane work requires more advance planning than any other machine in this list, because mistakes are not limited in their effect. The essentials: establishing the load weight precisely before lifting rather than estimating it, confirming the ground bears the outrigger pressure, and securing the lift area so nobody passes beneath the load.

Wind is more decisive in crane work than for any other machine, particularly with large-area loads that act like a sail. Wind speed limits therefore belong in the lift plan in advance, and postponing a lift is an acceptable decision rather than a scheduling failure.

How to request Cranes in Al-Qunfudhah

Six details settle most of the conversation and let you be quoted accurately the first time, rather than after two rounds of questions:

  • The size or capacity you need – or the working height, if you would rather we recommend the size
  • The project location in Al-Qunfudhah: district or address, not just the city
  • The start date and the hire duration
  • Site conditions: indoor or outdoor, floor type, and the narrowest access point
  • Whether you need an operator
  • Any facility access requirements that apply to equipment entering the site

There is no published price list: the rate changes with size, duration, location and delivery arrangements, so a single published number would be misleading for most cases. Send the details above through the quote form or WhatsApp and you will get a quote built on them.

Frequently Asked Questions

Why is the load weight not enough to specify a crane class?

Because a crane capacity falls as the lifting radius increases - the further the set-down point is from the machine centre. A crane rated at 50 tons may have only a fraction of that at a 20-metre radius. Specification therefore starts from two numbers together: the weight, and the horizontal distance between where the crane stands and where the load lands.

What needs to be ready on site before the crane arrives?

A level, stable standing position with room to deploy outriggers, confirmation that the ground bears the pressure beneath them, an approach route that accommodates the machine width and height, and a secured lift area nobody passes beneath. The load weight is established precisely before lifting rather than estimated, and wind speed limits belong in the lift plan.

How do I confirm a size is available in Al-Qunfudhah?

Availability depends on the size requested, the dates and the project location within Al-Qunfudhah, so it is confirmed per request rather than shown on the page. Send those details through the quote form or WhatsApp and you will get a reply confirming availability.

What does it cost to rent in Al-Qunfudhah?

There is no published price list: the rate changes with size, hire duration, project location and delivery arrangements, so a single number would be misleading for most cases. Send your project details and you will get a quote built on them.

Does the hire include an operator?

It depends on the machine and your project requirements. Cranes and excavators require a qualified operator, while scissor lifts and man lifts can be run by a trained technician. State what you need when requesting a quote so the price covers it.

What hire durations are available?

From a single day to more than a month. Short defined jobs suit daily hire; work running for weeks is cheaper per unit of time on weekly or monthly hire. Bear in mind that each delivery and collection cycle carries its own cost, so scattering a job across separate short hires usually costs more than one continuous period.

Request a quote

We receive your request immediately, and WhatsApp opens with a ready-made message so you can confirm directly with the rental team.